The SmartDive 150AT ROV is assembled on a reinforced frame and is equipped with thrusters with increased power. This solution increases the lifting capacity of the injection molding machine without compromising the speed of movement. Brushless motors with a force of 13 kgf allow the device to carry up to 4,5 kg of payload at a speed of 1,5 m/s. Thanks to powerful thrusters, the 150AT is not inferior in speed to smaller models, while exceeding them in load capacity.
SmartDive 150AT Specification
Feature;Value;
Maximum depth; 150 m;
Maximum speed (forward movement); 1,5 m/s
Dimensions; 630х435х330 mm;
Underwater module weight; 29 kg;
Payload; 4,5 kg
Brushless motors; 6 pcs. (including 4 horizontal and 2 vertical);
Adjusting the direction of horizontal thrusters; 3 positions: 1) for maximum forward speed, 2) optimal position for forward and lag movement, 3) for maximum lag speed
Operating time; Unlimited operating time (quick battery replacement if necessary);
Battery; Li-ion, 18 A*h;
Operating temperature range (in water); -5...45°C;
FullHD camera on a tilt mechanism; 1080p, 30 fps, viewing angle: 105°, tilt range: ±80° (additional 4K camera with a depth sensor is available optionally);
Light; 4 LED-lights of 5,000 lumens each. Beam angle: 95°. Light temperature: 5000K. Lanterns can be controlled remotely: turn on, turn off and change the luminous flux power;
Adjusting the direction of the upper lights; 19° up and 38° down;
Adjusting the direction of the lower lights; 23° up and down, 30° left and right;
Case frame material; HDPE (low pressure polyethylene);
Kevlar fiber reinforced cable on a mechanical spool with sliding contact (electric spool is optional); 300 m;
Cable diameter; 6,4 mm;
Minimum breaking force of the cable; 250 kgf;
Sensors on board; Gyroscope, accelerometer, depth, seawater temperature, compass, energy consumption control system;
Mobile operator's workplace (optionally); Laptop with a bright screen in a shockproof waterproof case – 1 psc. The software for controlling the SmartDive ROV is pre-installed on a laptop. Wireless joystick control - 1 psc. Virtual reality glasses (optionally);
Warranty and service; 12 months from the date of delivery;