Thank you!
We will contact you shortly
SmartDive LED Driver
LED-driver
SmartDive
The Smartdive LED driver is designed to generate the current required for the LED to operate. The current flowing through the LED depends on the control signal, which can be either analogue or digital.The driver can be used to manufacture LED-lights and lighting systems up to 40 watts.
Main charactristics of the SmartDive LED driver
Parameter
Value
Parameter
Parameter
Value
Value
Maximum LED current
6 А*
Parameter
Maximum LED current
Value
6 А*
Supply voltage range
8-30 V
Parameter
Supply voltage range
Value
8-30 V
Effective voltage range of the control signal
0-3,3 V**
Parameter
Effective voltage range of the control signal
Value
0-3,3 V**
Recommended frequency of digital control signal
2 kHz
Parameter
Recommended frequency of digital control signal
Value
2 kHz
Maximum control signal voltage, V
Ucc
Parameter
Maximum control signal voltage, V
Value
Ucc
Thermostat response temperature
100 ºC**
Parameter
Thermostat response temperature
Value
100 ºC**
Temperature hysteresis
30 ºC**
Parameter
Temperature hysteresis
Value
30 ºC**
Own consumption no more than
0,8 mA
Parameter
Own consumption no more than
Value
0,8 mA
Consumption in the overheat protection mode
1,3 mA
Parameter
Consumption in the overheat protection mode
Value
1,3 mA
Device dimensions, Length, Width, Height, mm
22,8 х 22,8 х 7,1 mm
Parameter
Device dimensions, Length, Width, Height, mm
Value
22,8 х 22,8 х 7,1 mm
*With sufficient cooling
Parameter
*With sufficient cooling
Value
**Configurable parameter
Parameter
**Configurable parameter
Value
The overall dimensions of the driver board
You can read detailed datasheet of the SmartDive LED driver here
Test of the underwater light with the SmartDive LED driver
Order SmartDive LED Driver
Please read our Privacy Policy and Cookie Policy. The form can be sent only after you tick the consent box.