Thank you!
We will contact you shortly
REMOTELY OPERATED UNDERWATER VEHICLE
SmartDive-150A
More equipment for more tasks.
The SmartDive 150A remotely operated underwater vehicle is capable of carrying up to 6 kg of payload. This allows you to install up to 5 pieces of additional equipment on the ROV. You can use sonars, manipulators, an underwater navigation system and other equipment at the same time. It significantly increases the range of tasks that the device can perform.
SmartDive 150A Specification
Feature
Value
Feature
Feature
Value
Value
Maximum depth
150 m
Feature
Maximum depth
Value
150 m
Maximum speed (forward movement)
1 m/s
Feature
Maximum speed (forward movement)
Value
1 m/s
Dimensions
630х442х330 mm
Feature
Dimensions
Value
630х442х330 mm
Underwater module weight
23 kg
Feature
Underwater module weight
Value
23 kg
Payload
4.5 kg
Feature
Payload
Value
4.5 kg
Brushless motors
6 pcs. (including 4 horizontal and 2 vertical)
Feature
Brushless motors
Value
6 pcs. (including 4 horizontal and 2 vertical)
Operating time
Unlimited operating time (quick battery replacement if necessary)
Feature
Operating time
Value
Unlimited operating time (quick battery replacement if necessary)
Battery
Li-ion, 36 A*h
Feature
Battery
Value
Li-ion, 36 A*h
Operating temperature range (on air)
-25...45°C
Feature
Operating temperature range (on air)
Value
-25...45°C
Operating temperature range (in water)
-5...45°C
Feature
Operating temperature range (in water)
Value
-5...45°C
FullHD camera on a tilt mechanism
1080p, 30 fps, viewing angle: 105°, tilt range: ±80° (additional 4K camera with a depth sensor is available optionally)
Feature
FullHD camera on a tilt mechanism
Value
1080p, 30 fps, viewing angle: 105°, tilt range: ±80° (additional 4K camera with a depth sensor is available optionally)
Light
4 LED-lights of 5,000 lumens each. Beam angle: 95°. Light temperature: 5000K. Lanterns can be controlled remotely: turn on, turn off and change the luminous flux power
Feature
Light
Value
4 LED-lights of 5,000 lumens each. Beam angle: 95°. Light temperature: 5000K. Lanterns can be controlled remotely: turn on, turn off and change the luminous flux power
Adjusting the direction of the upper lights
19° up and 38° down
Feature
Adjusting the direction of the upper lights
Value
19° up and 38° down
Adjusting the direction of the lower lights
23° up and down, 30° left and right
Feature
Adjusting the direction of the lower lights
Value
23° up and down, 30° left and right
Case frame material
HDPE (low pressure polyethylene)
Feature
Case frame material
Value
HDPE (low pressure polyethylene)
Kevlar fiber reinforced cable on a mechanical spool with sliding contact (electric spool is optional)
300 m
Feature
Kevlar fiber reinforced cable on a mechanical spool with sliding contact (electric spool is optional)
Value
300 m
Cable diameter
7.25 mm
Feature
Cable diameter
Value
7.25 mm
Minimum breaking force of the cable
250 kgf
Feature
Minimum breaking force of the cable
Value
250 kgf
Sensors on board
Gyroscope, accelerometer, depth, seawater temperature, compass, energy consumption control system
Feature
Sensors on board
Value
Gyroscope, accelerometer, depth, seawater temperature, compass, energy consumption control system
Mobile operator's workplace (optionally)
Laptop with a bright screen in a shockproof waterproof case – 1 psc. The software for controlling the SmartDive ROV is pre-installed on a laptop. Wireless joystick control - 1 psc. Virtual reality glasses (optionally)
Feature
Mobile operator's workplace (optionally)
Value
Laptop with a bright screen in a shockproof waterproof case – 1 psc. The software for controlling the SmartDive ROV is pre-installed on a laptop. Wireless joystick control - 1 psc. Virtual reality glasses (optionally)
Warranty and service
12 months from the date of delivery
Feature
Warranty and service
Value
12 months from the date of delivery
Learn more about SmartDive 150A
Please read our Privacy Policy and Cookie Policy. The form can be sent only after you tick the consent box.